XEIKON / PRINT STORE
Xeikon CX500
Dry toner with a 508 mm print width for labels, cartons, cup blanks and wall coverings. Roll-to-roll or roll-to-sheet configurations.
Discuss my productsCX500 has a 508 mm image width, allowing several items across the web. Printed material can be rewound or cut into sheets.
What you can print
For jobs that need a wider layout or sheets from a roll-fed press.
Specifications
Printing and control
| Technology | Full-rotary electrophotography, dry toner |
|---|---|
| Resolution | 1200 dpi |
| Colour configuration | 5 stations: CMYK + white; special colours available |
Substrate and format
| Web width | 250–520 mm¹ |
|---|---|
| Print width | 508 mm |
| Substrate weight | 40–350 gsm |
Speed and output
| Speed | Up to 30 m/min. Speed depends on substrate weight |
|---|---|
| Image length | Variable |
| Output | Rolls or sheets, depending on configuration |
¹ CX500 web width follows Xeikon’s 2021 spec sheet. We confirm it separately for the proposed configuration.
Compare presses
Swipe the table to see all models →
| Specification | CX30 | CX50 | CX300 | CX500 |
|---|---|---|---|---|
| Technology | Dry toner | Dry toner | Dry toner | Dry toner |
| Maximum speed | up to 20 m/min | up to 20 m/min | up to 30 m/min | up to 30 m/min |
| Image width | 322 mm | 508 mm | 322 mm | 508 mm |
| Resolution | 1200 dpi | 1200 dpi | 1200 dpi | 1200 dpi |
CX50 has the same image width as CX500 at a lower speed. At the narrower width, CX300 is faster than CX30. For CX500, check how many items fit across the web and how much material is left as waste.
About this press
Do you need rolls or sheets after printing?
It depends on the next operation. Roll die cutting and rewinding need a roll; sheet cutting, creasing and assembly need sheets. We select finishing equipment around that and check its speed.
How much finished output can I get per shift?
The rating of up to 30 m/min is not enough to calculate this. We need product size, layout, run length, changeover time, waste and finishing. Die cutting or assembly will limit output if they are slower than the press.
Choose a configuration
Send a substrate sample and artwork, including the flat layout for packaging. Tell us the run size and whether you need rolls or sheets after printing.
Discuss my products